Info Banner; Selection Of Audio Language; Teletext; Subtitles - Strong SRT 8113 User Manual

6.1.2 Channel list
Press ok in viewing mode to display the Channel List. Use p q in the Channel List to highlight your channel
of choice and press ok once to select the highlighted channel. Press ok again to leave the Channel List.
TIP:
6.1.3 using the
p switches to the next channel.
q switches to the previous channel.
Pg+ switches to the next 10 channels.
Pg- switches to the previous 10 channels.

6.2 Info banner

While watching TV you can press the Info button any time to get information about the current
channel and event*. Press Info twice for technical details about the current channel. If you have
connected an USB device then it will also call the Record list or Timeshift banner when you press the
Info button once more.*Event information is displayed when available. Availability depends on
broadcast.

6.3 selection of audio language

Some channels support a choice of audio formats and/or languages. To select another audio stream,
press AudIo in viewing mode. A list with available audio streams will now be displayed. Use p q to
select the desired stream and confirm with ok. The audio channel as stereo, mono, left and right can
be selected with the t u buttons.

6.4 Teletext

Your receiver includes a fully featured Teletext. To access Teletext, press the TTX button in viewing
mode and use the 0~9 buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the teletext screen. Use the p q buttons to select one page up or down, use t u buttons
to select subpages. Press EXIT or TTX to get back to viewing mode.
noTE:

6.5 subtitles

Some channels support a choice of subtitle languages. Press sub in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with p q and press ok to confirm. Press
EXIT to leave without making changes.

6.6 Timeshift

Timeshift allows you to pause live broadcasts and resume playback later. Connect your USB storage
device and make sure that Timeshift is set to ON in the menu DVR Settings. Press TImEshIfT/2 in
8
Use t u to toggle between the All Channel list, Channel List and favourite
lists or press fAv for a list of available favourite lists.
or Pg+/Pg- keys
p q
If characters are not displayed correctly then check if your Teletext language
is set to the correct language. See chapter 7.4.1.
PART 1 • English