Memory Module - EUROCOM DeskNote 3100C Manual

contrast control, and use Fn+F9 or Fn+F10 to adjust the brightness
control.
Solution 4 : The system has entered suspend mode. Please press any key or touch
the trackpad to wake up the computer.
Problem: The LCD panel displays incorrect font or blinks when the
computer is connected with an external monitor.
Solution : The resolution you use for the monitor exceeds that the LCD panel can
support whereas you have switched to the LCD panel. Please restart
the computer.

Memory Module

Problem: The computer can not boot.
Solution : The incorrect type of memory module is installed.
Problem: The memory capacity is not enough.
Solution : The memory is not correctly configured for the application.
Problem: The detected memory capacity is not correct.
Solution : Some memory module is not correctly installed or not compatible with
your computer.
Problem: The message "out of memory" is displayed.
Solution : The memory configuration is not correctly set or the memory is not
enough to run the application.
Problem: The message "insufficient memory" is displayed.
Solution : The application can not be operated as the memory is used up.
Chapter 4—Troubleshooting 4-6