Attaching A Tv Set - EUROCOM DeskNote 3100C Manual

This manual is for the eurocom 3100c desknoteä

Hide thumbs Also See for DeskNote 3100C:

Table of Contents

Chapter 2—Operation 2-34

Attaching a TV Set

The S-video jack on the rear panel of the DeskNote is used for transmitting video

signals to a TV set. You may need to select the video standard for video display.

Enter the System Configuration Utility (SCU), Components Menu to specify the

appropriate TV mode. Simultaneous display on external monitor (CRT) and TV is

available. You may enter the SCU to select the appropriate parameters or use the Fn

+ F6 keys (refer to Chapter 2, Using Hot Keys) to change the setting.

See figure 2-28 for information on attaching a TV set.

Note: Different countries use different TV broadcast standards. A TV set must

comply with the appropriate standard to properly receive broadcast signals.

You should refer to your TV user guide to make sure which TV standard you

are using.

Figure 2-28

Table of Contents

Do you have a question about the DeskNote 3100C and is the answer not in the manual?