Table of Contents
Advertisement
Chapter 2—Operation 2-12
Using Floppy Disk Drive
The DeskNote is equipped with a removable 1.44MB, 3.5" floppy disk drive
module. It is usually designated as drive A by default and may be used as a boot
device if properly set (please refer to Chapter 3, BIOS Utilities).
You may replace the floppy disk drive module with the following options: a 2.5"
secondary IDE hard disk drive (of 12.7mm high), a 120MB LS-120 floppy disk
drive (of 12.7mm high), or a secondary battery pack. Contact your dealer for
detailed information about these options.
Inserting/Removing Diskettes
Always insert your floppy diskette label-side up when using the floppy drive. Press
the eject button on the top-right corner of the floppy drive to remove your diskette.
Figure 2-12
Advertisement
Table of Contents
Need help?
Do you have a question about the DeskNote 3100C and is the answer not in the manual?
Questions and answers