Step 4: Installing Ati Dvd Play (Option) Driver - EUROCOM DeskNote 3100C Manual

Step 4: Installing ATI DVD Play (Option) Driver

Note:
Firstly make sure that it has already successfully installed the VGA drivers, Audio
Driver and DirectX6.
m
Boot the system; press Ctrl-Alt-S to enter SCU system.
[Power].
control] to set [Full Speed]. (If the clock of Intel Pentium II is above
366MHz/400MHz or if your D VD runs smoothly, you can skip the
step).
m
In the windows system, click [Start]; select [Setting], [Control
Panel], and [System]. Open [Device Manager]; select [CDROM].
Click the item including the type of [DVD-ROM], and [Setting]; then
enable [DMA] in Options.
m
Insert the CD of Ati-DVD-Play application and the program will
automatically run the installation until finished.
[Start] in the windows system.
[D:\Atiplay\setup.exe]. Run [setup.exe] to finish the installation.
Appendix B—I/O Port Pin Assignments B-11
Enable [Low Power Saving], or Select [Advance CPU
Otherwise, click
Select [Run].
Select
Open the path