Step 6: Installing Ati Dvd Play (Option) Driver; Step 7: Using Infrared Wireless Communication - EUROCOM DeskNote 3100C Manual

Step 6: Installing ATI DVD Play (Option) Driver

Note:
Firstly make sure that it has already successfully installed the VGA drivers, Audio
Driver and DirectX5/DirectX6.
m
Boot the system; press Ctrl+Alt+S to enter SCU system. Select
[Power].
control] to set [Full Speed]. (If the clock of Intel Pentium II is above
366MHz/400MHz or if your DVD runs smoothly, you can skip the
step).
m
In the windows system, click [Start]; select [Setting], [Control
Panel], and [System].
Click the item including the type of [DVD-ROM], and [Setting]; then
enable [DMA] in Options.
m
Insert the CD of Ati-DVD-Play application and the program will
automatically run the installation until finished.
[Start] in the windows system.
[D:\Atiplay\setup.exe]. Run [setup.exe] to finish the installation.
Step 8: Using Infrared Wireless Communication
m Please refer to the readme file under the FIR directory.
Appendix B—I/O Port Pin Assignments B-8
Enable [Low Power Saving], or Select [Advance CPU
Open [Device Manager]; select [CDROM].
Otherwise, click
Select [Run]. Open the path