Table of Contents
Advertisement
• Windows 2000 Advanced Server Service Pack 3
• 2 x QLogic 2200 HBA (Device Driver: 8.0.8)
– Tivoli Storage Manager client:
• IBM xSeries server
• Windows 2000 Advanced Server Service Pack 3
• 2 x QLogic 2200 HBA (Device Driver: 8.0.8)
– Disk Subsystem:
• IBM FAStT500 Raid controller with /2 EXP 500 disk enclosures
– Fabric:
• 2*IBM 2109 S08 + 1 * IBM 2109 S16 cascaded
• IBM SAN Fibre Channel Switch 2109 Model S08 (Kernel: 5.4, Fabric
OS: v2.6.0c)
– Library:
• IBM Ultrium 3583 with six LTO drives and integrated SAN Data
Gateway (pathlight 5000) (Windows 2000 Device Driver: 5.0.4.5)
• Datamover Firmware: 4.200.5
• LTO Drive Firmware: 25D4
• Library Firmware: 2.80
Software
– Server and Client operating system
• Windows 2000 Advanced Server Service Pack 3
– SoftwareDisk subsystem manager
• IBM FAStT Storage Manager V7.1or later
– SAN gateway management
• IBM StorWatch Specialist V2.7 or later
Note: The Tivoli Storage Manager Server will need two HBAs, one for
connecting to the SAN disk and other for the 3583 LTO tape library. We tried
configuring a single HBA for disks and tape, but this does not work very well
with Windows 2000.
Tip: A second HBA on the Tivoli Storage Manager client is only necessary if
you want to do both server-free and LAN-free operations on the client
machine.
Chapter 17. Server-free data movement
569
Advertisement
Table of Contents
