Table of Contents
Advertisement
– gateway
– generic
– SOLARIS
– Unisys
– nt (default)
11.Then enable the IP port:
ethEnable
12.Set the IP address:
ethAddrSet "192.168.0.212","255.255.255.0"
13.Set the gateway:
gateAddrSet "192.168.0.1"
14.Now issue the following command to enable the datamover agents:
sncFeatureEnable "License Key String"
The license key string is a unique key provided with the device. However, if
the license key was factory-installed, you can use
license key string. For example:
– First: SncFeatureEnable "BVRZC-G79DN"
– Value = 0 = 0x0
– Second: SncFeatureEnable "enable"
– Value = 0 = 0x0
– The datamover license is valid.
15.Reboot the gateway:
reboot
17.4.4 Configuring Tivoli Storage Manager server
To configure the Tivoli Storage Manager server for server-free data movement,
follow these steps:
1. Install the Ultrium device drivers (current level). Make sure that the server
system can recognize the tape drives and medium changer.
2. Set the processing options on the server:
set registration open
3. Set the server communication options:
set servername waikiki
set serverpass tsm52level0
enable
instead of the actual
Chapter 17. Server-free data movement
575
Advertisement
Table of Contents
