Table of Contents
Advertisement
Figure 20-9 illustrates the relationship between partitions for a remote backup
and network boot.
Figure 20-9 Remote backup to tape and network boot of partition
Onetime Remote Services configuration
Log in to the mars partition (server) and issue the following commands:
1. Issue the /usr/sbin/cfgremsvs command to configure Remote Services on
this partition.
2. Issue the /usr/sbin/cfgremaccess -h pluto -u all -f all command to
define pluto's access to this partition and its tape drive resources.
Log in to the pluto partition (client) and execute the following commands:
1. Issue the /usr/sbin/cfgremsvs command to configure Remote Services on
this partition.
2. Issue the /usr/sbin/cfgremserver -a -h mars command to define mars as
the backup server.
Sample backup to tape
The following command creates a full system (installation image) backup of the
client pluto partition, which includes both the datavg and rootvg volume groups.
The backup will be created on the tape device (/dev/rmt0) on the server pluto.
# /usr/sbin/sysback -h mars -f /dev/rmt0 datavg
This backup can later be restored to the same or a different partition in the
machine.
654
IBM Tivoli Storage Manager Implementation Guide
Mars Partition -
Network boot server
Backup server
Network
Pluto Partition -
Backup & boot client
Tape Drive
Advertisement
Table of Contents
