Table of Contents
Advertisement
Example 20-16 shows the options set for the node we configured in the lab.
Example 20-16 Set TSM network install client defaults
Set TSM Network Install Client Defaults
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP]
* Hostname
Perform no-prompt installation?
Debug Logging?
THE FOLLOWING ARE REQUIRED FOR NOPROMPT INSTALL:
Console Device Name
Console Terminal Type (if ascii)
Non-rootvg Volume Group Option
TSM Client Node Name
TSM Admin ID
Client Node or Admin Password
TSM Backup ID
TSM Server Port
TSM network device name
Gateway
[MORE...17]
Esc+1=Help
Esc+5=Reset
Esc+9=Shell
5. Press Enter to set the defaults.
20.3.5 Recovery and system reinstallation from a server
Performing a system installation or Bare Machine Recovery using a backup
stored in a Tivoli Storage Manager server is done just like any other SysBack
system installation, with the following exceptions:
You must network boot the system to the Installation and Maintenance main
menu. Tape, CD, or DVD device boots are not supported.
The installation device will be a Tivoli Storage Manager virtual device rather
than a tape, CD, DVD, or another network install server.
Esc+2=Refresh
Esc+3=Cancel
Esc+6=Command
Esc+7=Edit
Esc+0=Exit
Enter=Do
Chapter 20. Bare Machine Recovery
[Entry Fields]
atlantic.itsosj.sanjo>
no
no
[/dev/tty]
[term]
Restore rootvg only
[atlantic]
[admin]
[password]
[]
[1500]
[/dev/tsm0]
[9.43.86.88]
Esc+4=List
Esc+8=Image
677
+
+
+
+
+
Advertisement
Table of Contents
