License Information; Stand-Alone System Interaction With A Partition - IBM E16RMLL-I - Tivoli Storage Manager Implementation Manual

5. Execute any network boot configuration required if performing a network boot
of the partition.
6. Execute the backup of the stand-alone system.
7. Install the backup image of the stand-alone system to the partition.
Figure 20-12 on page 666 shows that the same network backup and network
boot capabilities exist between a stand-alone system and a partition as exists
solely between partitions.
Figure 20-12 Stand-alone system interaction with a partition

20.2.9 License information

To license your Tivoli Storage Manager for System Backup and Recovery
(SysBack) software, install the following filesets included on your product media
in addition to the installation of the base tivoli.tsm.client.sysback.rte fileset:
tivoli.tsm.client.sysback.license.rte
tivoli.tsm.client.sysback.license.cert
Special licensing measures apply for customers using SysBack Versions
5.1–5.4. There are no license filesets for this version of SysBack. For detailed
information related to licensing your product, refer to your product readme file
located at /usr/lpp/sysback/README.txt or other documentation that
accompanied your order.
666
IBM Tivoli Storage Manager Implementation Guide
Partition -
Installed with image of stand-alone
system
Network
Tape Drive
Tape Drive