IBM E16RMLL-I - Tivoli Storage Manager Implementation Manual page 381

Restoring 4,096 /TS/sys [Done]
Restoring 1,048,576 /TS/charlotte/data1 [Done]
Restoring 1,048,576 /TS/charlotte/data2 [Done]
Restoring 1,048,576 /TS/charlotte/data3 [Done]
Restoring 1,048,576 /TS/eduardo/data1 [Done]
Restoring 1,048,576 /TS/eduardo/data2 [Done]
Restoring 1,048,576 /TS/eduardo/data3 [Done]
Restoring 1,048,576 /TS/martin/data1 [Done]
Restoring 1,048,576 /TS/martin/data2 [Done]
Restoring 1,048,576 /TS/martin/data3 [Done]
Restoring 1,048,576 /TS/norbert/data1 [Done]
Restoring 1,048,576 /TS/norbert/data2 [Done]
Restoring 1,048,576 /TS/norbert/data3 [Done]
Restoring 1,048,576 /TS/peter/data1 [Done]
Restoring 1,048,576 /TS/peter/data2 [Done]
Restoring 1,048,576 /TS/peter/data3 [Done]
Restoring 105 /TS/sys/devconfig.txt [Done]
Restoring 233 /TS/sys/dsmserv.dsk [Done]
Restoring 67,985 /TS/sys/dsmserv.opt [Done]
Restoring
Restoring 1,027 /TS/sys/rc.tsmserver [Done]
Restoring 641 /TS/sys/volhist.txt [Done]
Restore processing finished.
Total number of objects restored:
Total number of objects failed:
Total number of bytes transferred:
Data transfer time:
Network data transfer rate:
Aggregate data transfer rate:
Elapsed processing time:
tsm>
If the backup set is made to tape, you can also restore from it if you have the
same kind of tape drive on the client. In that case, you take the tape from the
tape device attached to the Tivoli Storage Manager server, and specify that
device name (for example, /dev/rmt0) and -location=tape on the restore
backupset command.
9 /TS/sys/hbaapi.lvl [Done]
28
0
15.09 MB
1.15 sec
13,401.74 KB/sec
3,643.36 KB/sec
00:00:20
Chapter 11. Client operations
351