Table of Contents
Advertisement
2. Log in to the pluto partition (backup client) and execute the following
commands:
a. Issue the /usr/sbin/cfgremsvs command to configure Remote Services
on this partition.
b. Issue the /usr/sbin/cfgremserver -a -h mars command to define mars
as the backup server.
To configure Remote Services between mars (installation server) and the new
partition (client to be installed), do the following operations. Log in to the mars
partition (install server) and execute the following commands:
1. Issue the /usr/sbin/cfgremsvs command to configure Remote Services on
this partition.
Note: If you are working through this example in order and have already
issued the above command, it need only be issued one time.
2. Issue the /usr/sbin/cfgremaccess -h new_partition_hostname -u all -f
all command to define the new partition's access to this partition and its DVD
resources.
Note: This command assumes that the IP and host name of the new
partition have been defined in your network environment.
Sample backup to DVD
Make sure that you have evaluated any additional hardware resources that will
exist on the destination partition and install the needed device drivers to support
them before performing the backup.
To execute a full system (installation image) backup of this partition to be used
only to reinstall this partition or another partition on this machine, pointing the
backup to the /dev/cd1 device, which uses 2.6 GB media, issue the following
command:
# /usr/sbin/mksbcd -T "D" -t I -h mars -f /dev/cd1 -Z 2662
Starting with Sysback V5.6.5.0, you can create backups with the UDF on DVD
media when using AIX V5.2 and later. Issue the following command to use UDF
format:
# /usr/sbin/mksbcd -T "D" -t U -h mars -f /dev/cd1 -Z 2662
662
IBM Tivoli Storage Manager Implementation Guide
Advertisement
Table of Contents
