Planned Future Enhancements
Additional Linux HBA choices and Windows Server 200x Meta data Controller
7. Expand RHEL/SLES connectivity choices
a. Add ATTO HBA‟s for either MDC‟s and/or clients using RDAC MPP
i. This step is not tied to any other steps and may occur at any time after step 3
b. Add ATTO HBA‟s for either MDC‟s and/or clients using ATTO multipathing driver
i. This step is not tied to any other steps and may occur at any time after step 3
8. Add Windows Server 200x as either StorNext clients or as StorNext MDC‟s
a. Windows client Server 200x
i. Using previously supported QLogic and/or Emulex HBA‟s
ii. Using ATTO HBA‟s with either RDAC MPP or ATTO multipathing driver
b. We will NOT add this until AFTER the Windows Clients (XP, Vista, Windows 7) are
added to reduce confusion
APPLE, WINDOWS, and STORNEXT SUPPORT MATRIX
Meta Data Controller
Linux
RHEL 5.3
Linux
RHEL 5.3
Linux
SLES 10.2
Linux
RHEL 5.3
Client
Apple
Leopard
OSX
Apple
Snow Leopard
OSX
Linux
RHEL 5.3
Linux
RHEL 5.3
Linux
SLES 10.2
Linux
SLES 10.2
Windows
2003 SP2
Windows
2008 SP2
Windows
2008 R2
Windows
Windows 7
Windows
Vista
Windows
XP
Mixed
Digital Media Storage Solution Installation Guide
© Copyright 2010, IBM Corporation. All rights reserved.
Architecture
O/S
x64
x64
x64
x64
x64
x64
x86, x64
x86, x64
x86, x64
x86, x64
x86, x64
x86, x64
x86, x64
x86
x86
x86
(Planned)
HBA
As currently supported
(Qlogics/Emulex)
ATTO
As currently supported
(Qlogics/Emulex)
ATTO
ATTO
ATTO
As currently supported
(Qlogics/Emulex)
ATTO
As currently supported
(Qlogics/Emulex)
ATTO
As currently supported
(Qlogics/Emulex)
As currently supported
(Qlogics/Emulex)
As currently supported
(Qlogics/Emulex)
ATTO
ATTO
ATTO
As appropriate above
(Planned)
MPF
Supported
RDAC (MPP)
Yes
ATTO
Planned
RDAC (MPP)
Yes
ATTO
Planned
ATTO
Yes
ATTO
Yes
RDAC (MPP)
Yes
ATTO
Yes
RDAC (MPP)
Yes
ATTO
Yes
MPIO/DSM
Planned
MPIO/DSM
Planned
MPIO/DSM
Planned
ATTO
Planned
ATTO
Planned
ATTO
Planned
As appropriate
above
11
Need help?
Do you have a question about the IBM SYSTEM STORAGE DS3000 and is the answer not in the manual?
Questions and answers