4.28 Hinge
4.28 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-50 and 4-51.
1. Remove the following screws.
•
M2.5×4B
•
M2.5×6C
2. Stand the LCD mask and remove it.
CAUTION: When standing the LCD mask, be careful not to hold the top portion.
LCD mask
M2.5×6C Tapping
M2.5×4B FLAT HEAD
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-89
FLAT HEAD screw
Tapping screw
M2.5×6C Tapping
Figure 4-50 Removing the LCD mask
4 Replacement Procedures
×2
×4
M2.5×4B FLAT HEAD
M2.5×6C Tapping