4 Replacement Procedures
4.13
LCD Bezel Assembly
Removing the LCD Bezel Assembly
Remove the LCD bezel assembly according to the following procedures and Figures 4.28, 4.29
and 4.30.
1. Remove the two mask seals that cover the screws.
2. Remove two M2.5x5 screws as shown in Figure 4.28.
NB250/NB255 Maintenance Manual
Downloaded from LpManual.com Manuals
Figure 4.28 Removing screws from the LCD Bezel Assembly
M2.5x5*2
TOBSHIBA
4.13 LCD Bezel Assembly
4-38