Table 6-9 Boot Error Codes (Bxxx) - Compaq SW TL881 DLT Mini-Lib/1 Reference Manual

Table 6-8
Intermodule Error Codes (6xxx)
FSC Message
6044 Invalid Com Blk Type
6045 Command Overlap
6046 No Pkts To Send
6047 Invalid Direction
6048 Master Pkt ID Bad
6060 Slave 3 Ch Init Err
6061 Slave 3 Ch Sync Err
6062 Slave 3 Ch Flash Err
FSC Message
B001 Boot ROM CRC Error
B002 Boot RAM Test Failed
B004 Boot Comm Open Error
B005 Boot Novram Error
B006 Boot Unused Int
B007 Flash Init Error
continued
Description
A Slave inter-module process received a packet from
the Status/Message queue, but the packet's
CommBlock type was invalid.
A Slave inter-module process received a Command
from the Master inter-module process, but a
previously issued command is still being executed.
A Slave inter-module process has been requested to
send a packet to the Master inter-module process,
but the Slave inter-module process has no packets
to send.
A Slave inter-module process has received a
direction control byte from the Master inter-module
process, but the direction control byte is invalid.
An error occurred during the 3 Ch slave module
initialization.
An error occurred attempting to sync with the 3 Ch
slave module.
An error occurred attempting to flash the 3 Ch slave
module.
Table 6-9
Boot Error Codes (Bxxx)
Description
Diagnostics and Troubleshooting 6-19
continued