Setting Up A Mail Slot - Compaq SW TL881 DLT Mini-Lib/1 Reference Manual

6. With the
and the
line 1. Now you can use the
possible settings. Scroll downward so that 3 is displayed, then press the
Enter button to save the new selection. An * appears to the left of the 4,
to indicate that it is the current selection.
7. Press the Escape button repeatedly until the following submenu
reappears.
Library Parity:
*Enabled
Library Bus ID:
*0
Repeat this procedure for each configuration option you want to change.

Setting up a Mail Slot

Some of the available host software enables the system administrator to limit
access to the library as a whole while permitting insertion into or removal
from the library of one or more tape cartridges when needed. This feature is
commonly called a mail slot. It is implemented using SCSI import/export
elements.
In the MiniLibrary system, you can designate the magazine of any
MiniLibrary Base Module as the mail slot magazine. When you do so, the
entire magazine is withdrawn from the list of storage elements. You can
designate any number of mail slots from one slot up to the full size of the
magazine. To configure a mail slot, use the following procedure.
1. Move from the Default screen through the Main menu to the Configure
submenu.
2. Scroll down on the Configure submenu until you see Set Mail Slot, and
then select that option. The following screen appears:
Mail Slot Emul:
*Disabled
next to line 1, press the Enter button. The
remains at the end of line 4, and an
and
moves to line 2
appears at the end of
buttons to scroll through the
Installation 3-33