Overall Procedure; Table 1 Parts Location - Compaq SW TL881 DLT Mini-Lib/1 Manual

2 TL881 MiniLibrary Drive Upgrade Procedure

Overall Procedure

Number
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
NOTE: If the base module is part of an expanded TL881 MiniLibrary subsystem, refer to
the TL881 Mini Library Service Manual for information on removing the base module
from the subsystem.
To add a second drive to the base module you must do the following steps.
1. Remove the skin cover, if present, using the procedure in this
document.
2. Remove the cover plate using the procedure in this document.
3. Remove the drive caddy assembly using the procedure in this
document.
Table 1
Parts Location
Magazine door
Door opener/Magazine lock
Shuttle cable
Shuttle
Shuttle motor
Drive caddy assembly
Fan
Power supply
Controller PWB
AC power switch
Control panel
Unlock/open switch
Magazine security lock
Leadscrew
Part