Displaying Error Logs; Loading And Unloading Tapes - Compaq SW TL881 DLT Mini-Lib/1 Reference Manual

Displaying Error Logs

To display the error history of the module, you need to use the Show History
menu. Access this menu as follows:
Fault Code: XXXX
Error Description
DD/MMM/YYYY HH:MM:SS
Entry NNNN Of NNNN

Loading and Unloading Tapes

The Load/Unload menus let you specify a source and a destination for a
cartridge movement. As a result, you use exactly the same procedure to load
and unload. To load or unload a tape from the front panel of the module, use
the Load/Unload menus.
The following Default screen appears. From this screen, enter Menu Mode by
pressing the Enter button.
READY
Modules 012345_
0 _ _ _ _ _ _ _ _
10
Afterwards, the Main menu appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
The is next to the line that reads Load/Unload. Press the Enter button to
display the first Load/Unload submenu, which is shown below:
From:
DLT1
To:
*Slot3
9
_ _ _ _ _ 16
Operation 2-25