Compaq SW TL881 DLT Mini-Lib/1 Reference Manual page 154

6-12 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Table 6-5
Motor Process Error Codes (3xxx)
FSC
3103
3104
3105
3106
3107
3108
3109
310A
310B
3200
3201
3202
3203
3204
3205
3300
continued
Message
Picker Jammed
Picker Jammed
Picker Jammed
Picker Jammed
Picker Jammed
Picker Jammed
Picker Jammed
Picker Jammed
Picker Jammed
Elevator Jammed
Elevator Jammed
Elevator Jammed
Elevator Jammed
Elevator Jammed
Elevator Jammed
Passthru Jammed
Description
While stowing to a bin, the picker moved too far.
This generally occurs if the arm slips in between two
cartridges during the final push.
During a bin stow, the picker did not reach a position
far enough to insure that the cartridge was fully
inserted.
The picker was not able to home properly after
stowing a cartridge to a bin.
The picker was not able to position to the cartridge
notch while performing a bin fetch operation.
During a bin fetch, the picker stalled while
attempting to pull a cartridge into the shuttle.
The picker stalled while fetching from a bin.
The picker was not able to position to the cartridge
notch while performing a drive fetch operation.
During a drive fetch, the picker stalled while
attempting to pull a cartridge into the shuttle.
During a stow operation, the picker was not able to
insert the cartridge into the drive.
The elevator was not able to position properly while
attempting to recover an orphaned cartridge.
The elevator was not able to position properly during
an inventory.
The elevator was not able to position properly during
a fetch operation.
The elevator was not able to position properly during
a stow operation.
The elevator was not able to position properly during
a home operation.
The elevator stalled while attempting to open the
DLT door.
The pass-through elevator was not able to position
properly.