Clearing a Drive Cleaning Error
1 2
CAUTION
The library drive mechanism(s) are inactive while this option is in use.
To use on-line repair to clear a drive cleaning error:
1. With CLEAN DRV # displayed, press
2. Press
3. Enter the three-part numerical password (see "Entering the
4. INFO* displays. Press
5. Press
ADMIN*
PSWD 000 000 000
displays. (# is the drive number containing the damaged tape.)
until ADMIN* displays, then press
NEXT
Administration Menu Password" on page 3-7).
NEXT
then press
. DRIVE POWER* displays.
ENTER
or
until DRIVE STATUS displays, then press
NEXT
PREV
1 ON GOOD displays.
• If the damaged tape is in drive 1, press
• If the damaged tape is in drive 2, press
displays, then press
ENTER
Clearing a Drive Cleaning Error
ONLINE REPAIR
until the drive status
CANCEL
.
ENTER
or
until ONLINE REPAIR* displays,
PREV
.
ENTER
until DRV 2 ON GOOD
NEXT
.
Library Operation
. DRV
ENTER
4-27