Table of Contents
Advertisement
Setting a Configuration Option
1 2 3 4
Configuration options customize the way the library operates.
To change a configuration:
1. Verify that the drive status displays (if not, press
2. Press
3. Enter the three-part numerical password (see "Entering the
4. INFO* displays. Press
5. Press
6. Press
Table 4-8
Configuration Options
Config Name
RECOVERY
ON
ON/OFF
OFF
Default is RECOVERY ON, and recovery should remain ON
under normal conditions.
RESTORE
Sets all library configurations back to their default settings.
DEFAULTS
CLEAR
Used by service personnel only.
ODOMETERS
Sets all library odometers back to zero.
ADMIN*
PSWD 000-000-000
until ADMIN* displays, then press
NEXT
Administration Menu Password" on page 4-7).
NEXT
or
to display the desired configuration option, then press
NEXT
PREV
. If the configuration has multiple settings, the current setting
ENTER
flashes. Otherwise, the configuration option is set and OPTION SAVED
displays. (Configuration options are described in Table 4-8 on page 4-28.)
to return to the drive status ("ready" state).
CANCEL
Description
Library attempts to recover from errors.
Library immediately stops moving if an error
condition occurs.
Setting a Configuration Option
CONFIG*
CANCEL
.
ENTER
until CONFIG* displays, then press
Library Operation
until it does).
.
ENTER
Default
ON
—
—
4-29
Advertisement
Table of Contents
