If the Cleaning Cartridge Will Not Load
Table 4-6
Error Messages When Loading Cleaning Cartridges
Message
The cartridge may have been inserted incorrectly or a mechanical error
LOAD ERROR
may have occurred. A service call may be needed.
A cartridge needs to be inserted into the mailslot.
MAILSLOT EMPTY
The cartridge transport mechanism already contains a tape cartridge.
TRANSPORT FULL
Consult your software package documentation. A service call may be
needed.
Verify that the cartridge has been correctly inserted into the mailslot. If the
MAILSLOT
error cannot be corrected by removing and reinserting the cartridge, the
SENSOR
mailslot sensors may be bad and a service call is needed.
The cartridge could not be pulled into the mailslot. If the error cannot be
FAILED
corrected by removing and then reinserting the cartridge, a service call is
needed.
Cleaning the Tape Drives
Cause
Library Operation
4-25