HP Surestore Tape Library Model 2/28 User Manual page 77

Table 4-9 Information Logs (Continued)
DRIVE LOADS *
DRIVE FW*
INTERFACE FW*
HARD ERROR *
Log entries are described after "RECOVERY
ERROR" in this table.
Log Name
DRIVE 1
DRIVE 2
DRIVE 3
DRIVE 4
D1 REVISION#
D2 REVISION#
D3 REVISION#
D4 REVISION#
BUS NUM =
Retrieving Performance Information
Displays
Number of tape cartridge loads for drive 1.
Number of tape cartridge loads for drive 2.
Number of tape cartridge loads for drive 3
(four drive library only).
Number of tape cartridge loads for drive 4
(four drive library only).
Firmware revision of drive 1.
Firmware revision of drive 2.
Firmware revision of drive 3 (four drive
library only).
Firmware revision of drive 4 (four drive
library only).
Press or to display the interface
NEXT PREV
bus number to select, then view the following:
FAST WIDE SCSIFast wide interface bus type.
8052 CKSUM #Checksum of the 8052 code.
COBRA REV #Revision of the cobra chip on
the interface.
Log of unrecoverable errors and commands
that did not successfully complete. Returns
either "NO HARD ENTRIES" or "ENTRY #".
(There may be multiple hard error numbers.)
Press to view the log for the currently
ENTER
displayed error, or press
next error.
Library Operation
to select the
NEXT
4-33