Specifying SCSI Addresses
1 2 3 4
NOTE
The library has a Fast/Wide SCSI interface. SCSI addresses can be set from:
• 0 to 7 on a DLT4000-based library
• 0 to 15 on a DLT7000-based library
If connecting to a narrow host, use only addresses 0 to 7.
Table 4-1
SCSI ID Options
Option
SET IDs*
Assigns individual SCSI IDs to each
drive and the robotics controller.
VIEW IDs*
Displays the current drive and
robotics controller settings.
SET LIB BUS*
Specifies single-ended or
differential for the robotics
controller.
Table 4-2
Default SCSI Address Settings
DEVICE
LIB
DRV 1
DRV 2
DRV 3 (four-drive models only)
DRV 4 (four-drive models only)
ADMIN*
PSWD 000-000-000
Purpose
SCSI ID
6
5
4
3
2
Library Operation
Specifying SCSI Addresses
SCSI IDs*
Explained in
"Setting the SCSI Addresses" on
page 4-10
"Viewing the Current SCSI
Addresses" on page 4-10
"Setting the Robotics Controller
Bus Type" on page 4-13
BUS #
Bus 0
Bus 1
Bus 2
Bus 3
Bus 4
4-9