Library Operation
Cleaning the Tape Drives
NOTE
If the drive(s) are not empty, a DRIVE FULL message displays. The drives
must be emptied before they can be cleaned.
If the cleaning cartridge slot did not contain a cleaning cartridge, NOT
CLEAN CART displays briefly, and then CLEAN FAIL # displays. Press
CANCEL
cleaning slot contents move to the mailslot.
If drive error occurs (such as serial communications failure), FAILED
displays, then CLEAN DRIVES * displays.
7. CLEANING DRV # displays (where # is the drive being cleaned). When
NOTE
If the software package controls drive cleaning, the
displays after the drive number(s) being cleaned. The indicator flashes until
the drive is clean.
8. Press
4-24
twice to return to the "ready" state. Insert a cleaning cartridge. The
the drive has been cleaned, CLEANED DRIVE # displays briefly, then
CLEAN DRIVES * displays.
until the next operation to perform displays, or until the
CANCEL
drive status (library "ready" state) displays.
C
activity indicator