Removing Tape Cartridges Through The Bulk Load Access Door; Figure 4-5 Removing Tape Cartridges Through The Bulk Load Access Door - HP Surestore Tape Library Model 2/28 User Manual

Removing Tape Cartridges Through the Bulk Load
Access Door
NOTE Some software packages require that cartridges be inserted and removed
using the software. If a software package manages files in the library, check
the software documentation before proceeding with these steps.
To remove cartridges through the bulk load access door:
1. Verify that the drive status displays (if not, press
2. Verify that all drives are empty (
3. Press
4. Press
5. Unlock the bulk load access door using the key.
6. Open the top of the door, then lift it out (see Figure 4-5).
7. Remove tape cartridges from the desired storage slots (see Figure 4-5).
Figure 4-5

Removing Tape Cartridges Through the Bulk Load Access Door

necessary, use the mailslot to unload tapes from the drives.
or until RELEASE DOOR displays.
NEXT PREV
. DOOR RELEASED, READY, and DRIVE STATUS each
ENTER
display briefly, then the drive status displays.
Removing Cartridges from the Library
until it does).
CANCEL
displays after the drive number). If
Library Operation
4-21