Step 2: Prepare Components - HP Surestore Tape Library Model 2/28 User Manual

Library Installation

Step 2: Prepare Components

Step 2: Prepare Components
Make sure all required components are available.
Table 2-2 Required Components
If any components are missing, contact a sales representative.
2-4
Component
Library Do not unpack the library until it is in the
proper location.
SCSI cards Required number of cards installed in host depends on
library configuration. Connect drives to differential
fast/wide SCSI cards. Connect robotics controller to a
fast/wide differential or a single-ended SCSI card.
SCSI cables Required number of cables (68-pin) is one per drive and
one for the robotics controller. Maximum cable length
(total) is 25 meters if connected to a differential SCSI
card and 6 meters for a single-ended SCSI card.
Power cord Power cord is included with library.
Data cartridge One HP DLTtape IV data cartridge is included with
library.
Cleaning Cleaning cartridge is included with library.
cartridge
Installation Notes