Loading Cartridges Through The Bulk Load Access Door; Figure 4-4 Loading Tape Cartridges Through The Bulk Load Access Door - HP Surestore Tape Library Model 2/28 User Manual

Loading Cartridges Through the Bulk Load
Access Door
1. Verify that the drive status displays (if not, press
2. Verify that the drives are all empty (
NOTE Some software packages require that cartridges be inserted and removed
using the software. If a software package manages files in the library, check
the software documentation before proceeding.
3. Press
4. DOOR RELEASED, READY, and DRIVE STATUS each display briefly, then
5. Unlock the bulk load access door using the key.
6. Open the top of the door, then lift it out (see Figure 4-4).
Figure 4-4 Loading Tape Cartridges Through the Bulk Load Access Door
the drives are full, use the mailslot to load tapes.
until RELEASE DOOR displays, then press
NEXT
the drive status displays.
Library Operation
Loading Cartridges Into the Library
until it does).
CANCEL
displays after the drive number). If
.
ENTER
4-17