Set Interconnect Powerdelay; Set Interconnect Uid; Set Xfm Uid - HP Integrity Superdome 2 16-socket User Manual

SET INTERCONNECT POWERDELAY

Command:
SET INTERCONNECT POWERDELAY {ALL | <bay number> [{ - | , } <bay number>]}
{number of seconds to delay power | NOPOWERON}
Description:
Sets the PowerDelay status for the specified interconnect or range of interconnects. If the delay
is zero, the delay has no effect on the device. If the delay is NOPOWERON, the device cannot
power on until all devices have completed their delays.
Access level/Bay level:
◦
Administrator
◦
Bay specific
Restrictions:
You must have access to the specified bay number.

SET INTERCONNECT UID

Command:
SET INTERCONNECT UID {ALL | <bay number> [{ , | - } <bay number>]}
{ON | OFF}
Description:
Turns an interconnect UID on or off
Access level/Bay level:
◦
All
◦
Bay specific
Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.

SET XFM UID

Command:
SET XFM UID { ALL | <xfm_number> {[ - | , ] <xfm_number>}} {ON
Description:
Turns the UID LED of the specified Xbar Fabric modules on or off.
Access level/Bay level:
OA Administrator, OA Operator, OA user
Restrictions:
You must be logged on to the monarch OA to perform this command.
1 10 Interconnect management commands
| OFF}