Show Device Serial_Number Blade - HP Integrity Superdome 2 16-socket User Manual

SHOW SERVER STATUS ALL
SHOW SERVER TEMP ALL
SHOW PARTITION DVD
SHOW SERVER POWERDELAY ALL
SHOW SERVER BOOT ALL
SHOW SYSLOG SERVER ALL
SHOW SYSLOG ILO ALL
SHOW TOPOLOGY
SHOW USBKEY
SHOW USER(current user)
SHOW USER SESSIONS
SHOW USER LIST
SHOW LDAP INFO
SHOW LDAP CERTIFICATE
SHOW LDAP GROUP LIST
SHOW CA CERTIFICATE
SHOW TWOFACTOR INFO
SHOW PASSWORD SETTINGS
SHOW UPDATE
SHOW SYSLOG SETTINGS
SHOW VCMODE
SHOW SESSION TIMEOUT
SHOW VLAN
SHOW URB
SHOW DEVICE SERIAL_NUMBER BLADE ALL
SHOW SOLUTIONSID
SHOW UPDATE
SHOW DVD INFO
SHOW DVD STATUS
SHOW GPSM INFO ALL
SHOW GPSM STATUS
SHOW XFM STATUS ALL
SHOW XFM INFO ALL
SHOW XFM LIST
If you are connected to the monarch OA when you run the SHOW ALL command, these
commands also appear:
SHOW IOX INFO ALL
SHOW IOX STATUS ALL
SHOW IOX POWER ALL
SHOW IOX LIST
SHOW COMPLEX INFO
SHOW COMPLEX STATUS
Access level/Bay level:
All
Restrictions:
◦
This command displays only the bays for which you have privileges.
◦
To save the output, you must configure your telnet software to log the session to a file or
increase the history buffer size so that the output can be copied and pasted into another
file.

SHOW DEVICE SERIAL_NUMBER BLADE

Command:
SHOW DEVICE SERIAL_NUMBER BLADE <bay number>
Description:
Shows the specified direct attached blade device serial number
48 General management commands