14 Blade Management Commands; Set Nic; Set Blade Powerdelay; Set Blade Uid - HP Integrity Superdome 2 16-socket User Manual

14 Blade management commands

SET NIC

Command:
SET NIC {AUTO | FORCED}
Description:
Configures the external NIC for auto-negotiation or forced link settings.
Access level/Bay level:
OA Administrator
Restrictions:
None

SET BLADE POWERDELAY

Command:
SET BLADE POWERDELAY {ALL | <bay number> [{ - | , } <bay number>]}
{number of seconds to delay power | NOPOWERON}
NOTE:
Description:
Set the PowerDelay status of the specified server or range of servers. If the delay is zero, the
delay has no effect on the device. If the delay is NOPOWERON, then the device cannot power
on until all devices have completed the delays.
Access level/Bay level:
◦
Administrator
◦
Bay specific
Restrictions:
You must have access to the specified bay number.

SET BLADE UID

Command:
SET BLADE UID {ALL | <bay number> [{ - | , } <bay number>]} {ON | OFF}
NOTE:
Description:
Turns a server blade UID LED on or off
Access level/Bay level:
◦
All
◦
Bay specific
Restrictions:
You must have access to the specified bay number.
SERVER is a valid alias for BLADE.
SERVER is a valid alias for BLADE.
SET NIC 97