Show Interconnect Sessions; Show User Sessions - HP Integrity Superdome 2 16-socket User Manual

Access level/Bay level:
◦
All
◦
Bay specific
Restrictions:
Dependent on bay privileges
Example:
OA-0016355E560A> SHOW DEVICE SERIAL_NUMBER BLADE
Serial number: USM81500RP

SHOW INTERCONNECT SESSIONS

Command:
SHOW INTERCONNECT SESSIONS
Description:
Displays which users have serial console sessions in progress for each interconnect
Access level/Bay level:
◦
OA Administrator, OA Operator
◦
Bay specific
Restrictions:
You must have access to the specified bay.
Example:
OA-0018FE27577F> SHOW INTERCONNECT SESSION
Interconnect Bay
------------------
No Interconnect remote console sessions were detected.

SHOW USER SESSIONS

IMPORTANT:
subject to the session timeout defined by the SET SESSION TIMEOUT command:
SHOW {HR | FPL | LIVELOGS | SEL | SYSLOG | PARTITION CONSOLELOG}
CONNECT {BLADE | INTERCONNECT | PARTITION }
CO
FPL
SEL
If a user has one of these commands active, their session will not be removed when a session
timeout occurs; instead it will be removed once they exit the long-running command and interact
with the CLI. The SHOW USER SESSIONS command will not display the active session after a
session timeout occurs.
Command:
SHOW USER SESSIONS
Description:
Displays a list of authenticated sessions on the OA, including CLI and WebGUI sessions.
User
--------------
On Superdome 2 systems, the following long-running commands are not immediately
SHOW INTERCONNECT SESSIONS 49