Reboot Partition; Set Partition Dvd - HP Integrity Superdome 2 16-socket User Manual

Access level/Bay level:
OA Administrator, OA Operator
Restriction:
◦
nPar ID and vPar ID can either be the name or number of the nPartition or virtual
partition.
◦
You must be connected to the monarch OA.

REBOOT PARTITION

Command:
REBOOT PARTITION {{<nPar ID>} [:<vPar ID>]} [FORCE] [OVERRIDE]
Description:
◦
Reboots the OS on the specified nPartition or virtual partition.
◦
The FORCE argument ungracefully reboots the OS in the specified partition.
◦
The OVERRIDE argument reboots all virtual partitions on the specified nPartition.
Access level/Bay level:
OA Administrator, OA Operator
Restriction:
You must be connected to the monarch OA.

SET PARTITION DVD

Command:
SET PARTITION DVD { CONNECT | DISCONNECT } { nPartition number or name } [ :vPartition number or name ]
[ ENCLOSURE { enclosure number } ]
Description:
Connect or disconnect the DVD module to the specified partition.
The DVD module of the compute enclosure containing the primary blade of the partition is the
DVD module that is connected to the partition.
IMPORTANT:
any of the blades in the nPartition must be assigned to the target virtual partition.
For information on partition management, see the HP Integrity Superdome 2 Partitioning
Administrator Guide.
NOTE:
shut down or rebooted.
Access level/Bay level:
OA Administrator, OA Operator
140 Partition commands
Before connecting a DVD to a virtual partition, the iLO rootport (or ioslot) from
The DVD module is disconnected from a partition when the partition or the OA is