Set Ntp Secondary; Show Complex Info - HP Integrity Superdome 2 16-socket User Manual

SET NTP SECONDARY

Command:
SET NTP SECONDARY <ip address>>
Description:
Sets the secondary server used for synchronizing time and date using the NTP protocol
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
◦
You must be connected to the monarch OA.
◦
The <ip address> must be in the form ###.###.###.###, where each ### ranges
from 0 to 255.

SHOW COMPLEX INFO

Command:
SHOW COMPLEX INFO
Description:
Displays the following fields:
◦
Product name
◦
Complex name
◦
Original product number
◦
Current product number
◦
UUID
◦
Manufacturer
◦
Serial number
◦
Complex type
◦
Configured complex firmware version
During the initialization phase, string values can be set to "Unknown", "[Unknown]", or
"None". If this occurs, try the command again after a few minutes.
Access level/Bay level:
OA Administrator, OA Operator, OA user
Restrictions:
You must be connected to the monarch OA.
Example:
oa_hostname> show complex info
Product Name: Superdome2 16s
Complex Name: Complex1
Original Product Number: AH337A
Current Product Number: AH337A
UUID: Unset
Manufacturer: hp
SET NTP SECONDARY 95