Revision Number Scalar - Brocade Communications Systems 8 Reference Manual

Fabric os mib reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

trapRegFilter 1.3.6.1.3.94.2.3.1.3
This value defines the trap severity filter for this trap host. The connUnit sends traps to this host
that have a severity level less than or equal to this value. The default value of this object is Warning.
The mapping between errorlog severity level and this variable is shown in
TABLE 24
System Error Log
errshow command
none (0)
Critical (1)
Error (2)
Warning (3)
Info (4)
Debug (5)
This severity applies to all entries. Refer to
The values 1, 3, 7, and 10 are not valid for SET operations.
trapRegRowState 1.3.6.1.3.94.2.3.1.4
Specifies the state of the row. This entry always returns rowActive and allows for read-only.
TABLE 25
State
rowDestroy (1)
rowInactive (2)
rowActive (3)

Revision Number Scalar

revisionNumber 1.3.6.1.3.94.3
This is the revision number for this MIB. The format of the revision value is as follows:
Fabric OS MIB Reference
53-1001768-01
trapRegFilter for errorlog severity level
FA-MIB
unknown (1)
critical (4)
error (5)
warning (6)
info (8)
debug (9)
TrapRegRowState for Read/Write
Description (Read)
Read- Can never happen.
Read- Indicates that this row does
exist but that traps are not enabled
to be sent to the target.
Read- Indicates that this row exists
and that traps are enabled to be sent
to the target.
trapRegFilter 1.3.6.1.3.94.2.3.1.3
Table 22
FcEventSeverity in
Description (Write)
Write- Remove this row from the table.
Write- If the row does not exist and the agent allows
writes to the trap table, then a new row is created. The
values of the optional columns are set to default
values. Traps are not enabled to be sent to the target.
If the row already existed, then traps are disabled from
being sent to the target.
Write- If the row does not exist and the agent allows
writes to the trap table, then a new row is created. The
values of the optional columns are set to default
values. Traps are enabled to be sent to the target. If
the row already exists, then traps are enabled to be
sent to the target.
8
Table
24:
on page 235.
275

Advertisement

Table of Contents
loading

Table of Contents