Remark Dscp - HP 6125XLG Command Reference Manual

Usage guidelines
The command applies to only incoming traffic.
Examples
# Configure traffic behavior database to mark matching traffic with drop priority 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark drop-precedence 2

remark dscp

Use remark dscp to configure a DSCP marking action.
Use undo remark dscp to restore the default.
Syntax
remark [ green | red | yellow ] dscp dscp-value
undo [ green | red | yellow ] remark dscp
Default
No DSCP marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
green: Specifies green packets.
red: Specifies red packets.
yellow: Specifies yellow packets.
dscp-value: Specifies a DSCP value, which can be a number in the range of 0 to 63 or a keyword
in Table 19.
Table 19 DSCP keywords and values
Keyword
default
af11
af12
af13
af21
af22
af23
af31
af32
DSCP value (binary)
000000
001010
001100
001110
010010
010100
010110
011010
011100
48
DSCP value (decimal)
0
10
12
14
18
20
22
26
28