Rule (Ethernet Frame Header Acl View) - HP 6125XLG Command Reference Manual

display packet-filter statistics sum
•

rule (Ethernet frame header ACL view)

Use rule to create or edit an Ethernet frame header ACL rule.
Use undo rule to delete an Ethernet frame header ACL rule or some attributes in the rule.
Syntax
rule [ rule-id ] { deny | permit } [ cos vlan-pri | counting | dest-mac dest-address dest-mask | { lsap
lsap-type lsap-type-mask | type protocol-type protocol-type-mask } | source-mac source-address
source-mask | time-range time-range-name ] *
undo rule rule-id [ counting | time-range ] *
Default
An Ethernet frame header ACL does not contain any rule.
Views
Ethernet frame header ACL view
Predefined user roles
network-admin
Parameters
rule-id: Specifies a rule ID in the range of 0 to 65534. If no rule ID is specified when you create an ACL
rule, the system automatically assigns it a rule ID. This rule ID is the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.
permit: Allows matching packets to pass.
cos vlan-pri: Matches an 802.1p priority. The vlan-pri argument can be a number in the range of 0 to 7,
or in words, best-effort (0), background (1), spare (2), excellent-effort (3), controlled-load (4), video (5),
voice (6), or network-management (7).
counting: Counts the number of times the Ethernet frame header ACL rule has been matched. The
counting keyword enables match counting specific to rules, and the hardware-count keyword in the
packet-filter command enables match counting for all rules in an ACL. If the counting keyword is not
specified, matches for the rule are not counted.
dest-mac dest-address dest-mask: Matches a destination MAC address range. The dest-address and
dest-mask arguments represent a destination MAC address and mask in the H-H-H format.
lsap lsap-type lsap-type-mask: Matches the DSAP and SSAP fields in LLC encapsulation. The lsap-type
argument is a 16-bit hexadecimal number that represents the encapsulation format. The lsap-type-mask
argument is a 16-bit hexadecimal number that represents the LSAP mask.
type protocol-type protocol-type-mask: Matches one or more protocols in the Ethernet frame header. The
protocol-type argument is a 16-bit hexadecimal number that represents a protocol type in Ethernet_II and
Ethernet_SNAP frames. The protocol-type-mask argument is a 16-bit hexadecimal number that represents
a protocol type mask.
17