<Sysname> reset qos policy global inbound
reset qos vlan-policy
Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a
VLAN.
Syntax
reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
inbound: Clears the statistics of the QoS policy applied to the incoming traffic of the specified VLAN.
outbound: Clears the statistics of the QoS policy applied to the incoming traffic of the specified VLAN.
Usage guidelines
If no direction is specified, this command clears the statistics of the QoS policies in both directions of the
VLAN.
Examples
# Clear the statistics of QoS policies applied to VLAN 2.
<Sysname> reset qos vlan-policy vlan 2
65