Qos Lr - HP 6125XLG Command Reference Manual

Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the rate limit configuration on all the interfaces.
Examples
# Display the rate limit configuration on all the interfaces.
<Sysname> display qos lr interface
Interface : Ten-GigabitEthernet1/1/5
Direction: Inbound
CIR 102400 (kbps), CBS 5120000 (Bytes)
Direction: Outbound
CIR 204800 (kbps), CBS 10240000 (Bytes)
Table 29 Command output
Field
Interface
Direction
CIR
CBS

qos lr

Use qos lr to limit the rate of packets on the interface.
Use undo qos lr to remove the rate limit.
Syntax
qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ]
undo qos lr { inbound | outbound }
Default
Rate limit is not configured on an interface.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
inbound: Limits the rate of incoming packets on the interface.
outbound: Limits the rate of outgoing packets on the interface.
cir committed-information-rate:
committed-information-rate argument is integral multiples of 8 between 8 and 10485760 for 10-GE
interfaces, integral multiples of 8 between 8 and 20971520 for 20-GE interfaces, and integral multiples
of 8 between 8 and 41943040 for 40-GE interfaces.
Description
Interface type and interface number.
Direction in which the rate limit configuration is applied: inbound or outbound.
CIR in kbps.
CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic.
Specifies the CIR in kbps.
73
The value range for the