Display Qos Policy Control-Plane - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
network-operator
Parameters
user-defined: Displays user-defined QoS policies.
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters. If no QoS
policy name is specified, this command displays configuration information of all the user-defined QoS
policies.
classifier classifier-name: Specifies a traffic class by its name, a case-sensitive string of 1 to 31 characters.
If no traffic class name is specified, this command displays information about all traffic classes in the
specified QoS policy.
Examples
# Display the configuration information of all the user-defined QoS policies.
<Sysname> display qos policy user-defined
User-defined QoS policy information:
Policy: 1 (ID 100)
Classifier: 1 (ID 100)
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
Green action: pass
Yellow action: pass
Red action: discard
Classifier: 2 (ID 101)
Behavior: 2
Accounting enable: Packet
Filter enable: Permit
Marking:
Remark dot1p 1
Classifier: 3 (ID 102)
Behavior: 3
-none-
For the output description, see

display qos policy control-plane

Use display qos policy control-plane to display information about the QoS policies applied to the
specified control plane.
Syntax
display qos policy control-plane slot slot-number [ inbound ]
Table 16 and Table 18.
54