Reset Qos Policy Control-Plane; Reset Qos Policy Global - HP 6125XLG Command Reference Manual

Examples
# Apply the QoS policy test to the incoming traffic of VLAN 200, VLAN 300, VLAN 400, and VLAN
500.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 inbound

reset qos policy control-plane

Use reset qos policy control-plane to clear the statistics of the QoS policy applied in a certain direction
of a control plane.
Syntax
reset qos policy control-plane slot slot-number [ inbound ]
Views
User view
Predefined user roles
network-admin
Parameters
inbound: Clears the statistics of the QoS policy applied to the incoming traffic of the control plane.
slot slot-number: Clears the statistics of the QoS policies applied to the control plane of the IRF member
device specified by the slot number.
Examples
# Clear the statistics of the QoS policy applied to the control plane of IRF member device 3.
<Sysname> reset qos policy control-plane slot 3

reset qos policy global

Use reset qos policy global to clear the statistics of a global QoS policy.
Syntax
reset qos policy global [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
inbound: Clears the statistics of the global QoS policy applied to incoming traffic globally.
outbound: Clears the statistics of the global QoS policy applied to outgoing traffic globally.
Usage guidelines
If no direction is specified, this command clears the statistics of the global QoS policies in both directions.
Examples
# Clear the statistics of the global QoS policy applied to the incoming traffic globally.
64