Qos Wrr - HP 6125XLG Command Reference Manual

af3
af4
ef
cs6
cs7
Table 31 Command output
Field
Interface
Output queue
Queue ID
Group
Weight
Related commands

qos wrr

qos wrr
Use qos wrr to enable WRR queuing and specify the weight type for an interface.
Use undo qos wrr to disable WRR queuing and restore the default queue scheduling algorithm for an
interface.
Syntax
qos wrr { byte-count | weight }
undo qos wrr { byte-count | weight }
Default
An interface uses the byte-count WRR queuing algorithm, and queues 0 through 7 have weights of 1, 2,
3, 4, 5, 9, 13, and 15, respectively.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
byte-count: Allocates bandwidth to queues in terms of bytes.
weight: Allocates bandwidth to queues in terms of packets.
Usage guidelines
You must use the qos wrr command to enable WRR queuing before you can configure WRR queuing
parameters for a queue on an interface.
1 4
1 5
1 9
2 13
2 15
Description
Interface type and interface number.
Type of the current output queue.
ID of a queue.
Number of the group a queue is assigned to. By default, all queues belong to group
1.
Packet-based queue scheduling weight of a queue. N/A is displayed for a queue
that uses the SP queue scheduling algorithm.
77