Display Buffer - HP 6125XLG Command Reference Manual

Examples
# Enable the Burst function.
<Sysname> system-view
[Sysname] burst-mode enable

display buffer

Use display buffer to display buffer configuration.
Syntax
display buffer [ slot slot-number ] [ queue [ queue-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a member device by its number in an IRF fabric. Without this option, the
command applies to all member devices.
queue queue-id: Specifies a queue by its number in the range of 0 to 7. If no queue is specified, the
command displays configuration information for all queues.
Usage guidelines
Without the queue keyword, this command displays the buffer configuration made by the buffer
total-shared command.
With the queue keyword, this command displays the buffer configuration made by both the buffer queue
guaranteed and buffer queue shared commands.
Examples
# Display buffer configuration.
<Sysname> display buffer
Slot Type
1 cell
Specify the slot num
Unit: Ratio
<Sysname> display buffer queue
Slot Queue
2 0
2 1
2 2-7
Specify the slot num
Shared: Size of the maximum shared buffer per queue
Unit: Ratio
Eg(Total-shared)
25
Total-shared: Size of the shared buffer for all ports
Type Eg(Guaranteed , Shared)
cell 20 , 33
cell 13 , 35
cell 13 , 33
Guaranteed: Size of the minimum guaranteed buffer per queue
100