Display Qos-Acl Resource - HP 6125XLG Command Reference Manual

In-bound policy:
ACL 2001, Hardware-count
rule 0 permit source 2.2.2.2 0
rule 5 permit source 1.1.1.1 0
Default action: Deny
Table 5 Command output
Field
Interface
In-bound policy
Out-bound policy
ACL 2001
Hardware-count
Default action

display qos-acl resource

Use display qos-acl resource to display QoS and ACL resource usage.
Syntax
display qos-acl resource [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device. The slot-number argument represents the ID of the IRF
member device. If no IRF member device is specified, the command displays QoS and ACL resource
usage on all member devices.
Examples
# Display QoS and ACL resource usage.
<Sysname> display qos-acl resource
Interfaces: TGE1/0/1 to TGE1/0/16, XGE1/0/17 to XGE1/0/20
---------------------------------------------------------------------
Type
---------------------------------------------------------------------
VFP ACL
FGE1/1/1 to FGE1/1/4, XGE1/1/5 to XGE1/1/12
Total Reserved
1024 256
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
Successfully enables counting ACL rule matches.
Default action for packet filtering, namely, the action to take on
packets that do not match the ACL. Deny means to drop the
packets. If the default action is to permit the packets to pass
through, the field is not displayed.
Configured Remaining
0 768
12
Usage
25%