Step - HP 6125XLG Command Reference Manual

Parameters
rule-id: Specifies an ACL rule ID in the range of 0 to 65534. The ACL rule must already exist.
text: Specifies a comment about the ACL rule, a case-sensitive string of 1 to 127 characters.
Examples
# Create a rule for IPv4 basic ACL 2000, and add a comment about the rule.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule 0 deny source 1.1.1.1 0
[Sysname-acl-basic-2000] rule 0 comment This rule is used on FortyGigE 1/1/1.
Related commands
display acl

step

Use step to set a rule numbering step for an ACL.
Use undo step to restore the default.
Syntax
step step-value
undo step
Default
The rule numbering step is five.
Views
IPv4 basic/advanced ACL view, IPv6 basic/advanced ACL view, Ethernet frame header ACL view
Predefined user roles
network-admin
Parameters
step-value: ACL rule numbering step in the range of 1 to 20.
Usage guidelines
The rule numbering step sets the increment by which the system numbers rules automatically. For example,
the default ACL rule numbering step is 5. If you do not assign IDs to rules you are creating, they are
numbered 0, 5, 10, 15, and so on. The wider the numbering step, the more rules you can insert between
two rules. Whenever the step changes, the rules are renumbered, starting from 0. For example, if there
are five rules numbered 5, 10, 13, 15, and 20, changing the step from 5 to 2 causes the rules to be
renumbered 0, 2, 4, 6, and 8.
Examples
# Set the rule numbering step to 2 for IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
32