Qos Wrr Group Sp - HP 6125XLG Command Reference Manual

Table 32 The number-keyword map for the
Number
0
1
2
3
4
5
6
7
Examples
# Enable byte-count WRR queuing on Ten-GigabitEthernet 1/1/5, assign queue 0, with the scheduling
weight 10, to WRR group 1, and assign queue 1, with the scheduling weight 5, to WRR group 2.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] qos wrr byte-count
[Sysname-Ten-GigabitEthernet1/1/5] qos wrr 0 group 1 byte-count 10
[Sysname-Ten-GigabitEthernet1/1/5] qos wrr 1 group 2 byte-count 5
Related commands
• display qos wrr interface
qos wrr
•

qos wrr group sp

Use qos wrr group sp to assign a queue to the SP group.
Use undo qos wrr group sp to restore the default.
Syntax
qos wrr queue-id group sp
undo qos wrr queue-id
Default
An interface uses the byte-count WRR queuing algorithm, and all the queues are in WRR group 1.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
queue-id: Specifies a queue by its ID in the range of 0 to 7.
sp: Assigns a queue to the SP group, which uses the SP queue scheduling algorithm.
queue-id
argument
Keyword
be
af1
af2
af3
af4
ef
cs6
cs7
79