Qos Car - HP 6125XLG Command Reference Manual

network-operator
Parameters
car-name: Specifies the name of an aggregate CAR action. This argument must start with a letter, and is
a case-sensitive string of 1 to 31 characters. If no CAR action is specified, this command displays the
configuration and statistics of all the aggregate CAR actions.
Examples
# Display aggregate CAR configuration.
<Sysname> display qos car name
Name: a
Mode: aggregative
CIR 12800 (kbps), CBS 800256 (Bytes), EBS 512 (Bytes), PIR 25600 (kbps)
Green action: pass
Yellow action: pass
Red action: discard
Slot 0:
Green packets: 54641 (Packets)
Red packets: 856 (Packets)
Slot 1:
Green packets: 12541 (Packets)
Red packets: 1235 (Packets)
Table 36 Command output
Field
Name
Mode
CIR CBS EBS PIR
Green action
Yellow action
Red action
Green packet
Red packet

qos car

Use qos car to configure an aggregate CAR action.
Use undo qos car to remove an aggregate CAR action.
Description
Name of the aggregate CAR action.
Type of the aggregate CAR action: aggregative.
Parameters for the CAR action.
Action to take on green packets:
•
discard—Drops the packets.
•
pass—Permits the packets to pass through.
Action to take on yellow packets:
•
discard—Drops the packets.
•
pass—Permits the packets to pass through.
Action to take on red packets:
•
discard—Drops the packets.
•
pass—Permits the packets to pass through.
Statistics about green packets.
Statistics about red packets.
93