Ssh Server Compatible-Ssh1X Enable; Ssh Server Dscp - HP FlexFabric 7900 Series Command Reference Manual

Usage guidelines
If a user does not finish the authentication when the timeout timer expires, the connection cannot be
established.
You can set a small value for the timeout timer to prevent malicious occupation of TCP connections while
authentications are suspended.
Examples
# Set the SSH user authentication timeout timer to 10 seconds.
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
Related commands
display ssh server

ssh server compatible-ssh1x enable

Use ssh server compatible-ssh1x enable to enable the SSH server to support SSH1 clients.
Use undo ssh server compatible-ssh1x [ enable ] to disable the SSH server from supporting SSH1 clients.
Syntax
ssh server compatible-ssh1x enable
undo ssh server compatible-ssh1x [ enable ]
Default
The SSH server supports SSH1 clients.
Views
System view
Predefined user roles
network-admin
network-operator
Usage guidelines
This command is not available in FIPS mode.
The configuration takes effect only on the clients at next login.
Examples
# Enable the SSH server to support SSH1 clients.
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
Related commands
display ssh server

ssh server dscp

Use ssh server dscp to set the DSCP value in the IPv4 packets that the SSH server sends to the SSH clients.
184